产品详情
Horizon 2 Stage Moving Platform Machine

Horizon 2 Stage Moving Platform Machine

Brand: Mactronix
Model: HJ2-x25 P5
产品详情
Specifications


  • Power:

  • 220/110VAC    50/60Hz    Single Phase

  • 3 Amp @ 110VAC

  • CDA/N2 :

  • 75 to 90 psi

  • Grounding:

  • Single Point Low Impedance VAC (provided)

  • Exhaust:

  • 1.25″ Diameter port; 5 CFM max (non-process)

  • Wafer Size:

  • 3” (75 mm)  thru  8” (200 mm)

  • Weight:

  • ≈ 70 Lbs.

  • Dimensions (W x D x H):

  • 75mm thru 150mm (3″thru 6″): 17″ x 14″ x 32″

  • 200 mm (8 inch): 17” x 24” x 47”

Options

  • Recessed mounting

  • Vespel package for high temperature applications

  • Stainless steel covers

  • Hot boat sensor


Features & Benefits

  • Horizon Junior 2-Stage Series V will transfer a maximum of 25 wafers between two cassettes, two process boats or one process boat and one cassette.

  • PLC controlled enhancing system simplicity.

  • As with all Mactronix wafer transfer systems, the Horizon Series may be configured to accommodate a wide range of Plastic, Teflon®, Metal, Quartz, Silicon Carbide, and Polysilicon carriers.

  • With the push of a button, the machine transfers wafers automatically.

  • Stage shifts for easy loading and unloading of carriers and boats.

  • The Horizon Series V machines are designed to limit particle contamination by using rod-less cylinders, “clean room grade” rails and bearings and electric boat sensors.

  • The machine will not introduce more than 1.5 particles, greater than .23 micron in diameter, per wafer per transfer (machine must be exhausted to achieve this figure).

  • All aluminum parts are hard black anodized for corrosion resistance.

  • Electronic through beam sensors are used to detect wafer presence in boats and retainers thus preventing accidental double loading and scratches.

  • Lift system uses ramped speed controls for gentle pick-up and landing.

  • Pressure sensors are used for both personal safety and prevent wafer damage by inhibiting machine operation.

  • Retainers default to closed position to prevent the dropping of wafers in the event of a power disruption or a loss of air pressure or both.

  • A “Maintenance/Cleaning Mode” is provided to facilitate preventative maintenance.

  • The Series V machines have been tested with up to 50,000 volts of electrostatic discharge without disruption to internal electronics. The Series V machines are virtually immune to RFI noise, EMF, and ESD.

  • Uptime will exceed 99.25%.

    • MTBF (mean time between failure): 2,500 hours

    • MTBA (mean time between assist): 1,000 hours

    • MTTR (mean time to repair): less than 1 hour


  • PLC controller is equipped with an RS422 communications port.

美国:+1 (408) 420-3561    |   北京:+86 (010) 62561331    |   上海:+86 (021) 61363596


会员登录
登录
其他账号登录:
我的资料
留言
回到顶部